APG 0810H60/decyl glucoside/CAS:68515-73-1
Product Introduction
APG 0810H60/220 is a nonionic surfactant, chemically known as Decyl Glucoside (CAS 68515-73-1). It is synthesized through the condensation reaction of naturally sourced glucose and synthetic decyl alcohol. This structure endows APG 0810H60/220 with unique properties, combining the formulation ease and compatibility of nonionic surfactants with the solubility and foaming characteristics of anionic surfactants.
Product Usage Guide
Dilution and Dissolution
APG 0810H60/220 is a nonionic surfactant, chemically named Decyl Glucoside (CAS 68515-73-1). It is synthesized from natural glucose and synthetic decyl alcohol through condensation. This structure imparts APG 0810H60/220 with unique properties, combining the formulation ease and compatibility of nonionic surfactants with the solubility and foaming characteristics of anionic surfactants. Ensure all equipment is clean and free of contaminants before use. Slowly add APG 0810H60/220 to water to avoid excessive foaming. The recommended water temperature ranges from room temperature to 40°C; higher temperatures may degrade or inactivate the product.
Stirring and Mixing
Stir the mixture at an appropriate speed until fully dissolved. This typically takes several minutes to over ten minutes, depending on the amount added and stirring speed. Ensure the solution is uniform and free of undissolved particles. If insoluble materials are found, it may be due to insufficient stirring or low temperature. Increasing the temperature or extending the stirring time can improve this situation.
pH Adjustment
APG 0810H60/220 performs best under neutral to weakly acidic conditions. If necessary, adjust the solution's pH by adding small amounts of acid (e.g., citric acid) or base (e.g., sodium hydroxide solution), but do so carefully to avoid localized high concentrations that could deactivate or degrade the product.
Application and Dosage
APG 0810H60/220 has a wide range of applications, including personal care products, household cleaners, and industrial cleaning. The recommended dosage varies by application. For example, in shampoos, the recommended amount is 1% to 5%, while in hard surface cleaners, it can be up to 10%. Always follow supplier guidelines or determine the optimal amount through experimentation.
Storage and Disposal
After use, seal the container and store in a dry, cool place, away from direct sunlight and high temperatures. Do not pour remaining chemicals down the drain or into the environment; dispose of or recycle according to local regulations.
Labeling information
INCI name: decyl glucoside
CAS-No.: 68515-73-1
Formula: C16H32O6
Purity: 58-62%
Species: nonionic surfactant
Synonyms: APG60, APG0810-60%
Product properties
Appearance
Light yellow viscous liquid
Physical properties
| Solid Content(%) | 58-62 |
| Water (wt %) | 38-42 |
| pH Value (20% aq.) | 11.5-12.5 |
| Free Alcohol (wt %) | 1max |
| Viscosity (mPa·s), 20°C | 500-2500 |
| Sulfated Ash (wt %) | 3max |
| Density(g/cm3),25°C | 1.12-1.14 |
Product guidance
APG 0810H60 is a nonionic surfactant offering superior performance through the combination of formulation ease and compatibility typical of nonionics, along with the solubility and foam characteristics of anionic surfactants. It delivers excellent detergency on hard surfaces and processing advantages in various cleaning products, including those used in kitchens, bathrooms, and industrial and institutional (I&I) alkaline cleaners. This surfactant demonstrates exceptional wetting, dispersing, and surface tension reduction properties, enhancing soil removal and emulsification. Distinct from conventional nonionics, APG 0810H60 is notably soluble in concentrated electrolyte solutions and can solubilize other less soluble ingredients.
Furthermore, APG 0810H60 is derived from renewable sources – glucose from corn and fatty alcohols from coconut and palm kernel oils. Its chemical composition renders it extremely mild, minimally toxic, and readily biodegradable.
APG 0810H60 maintains its own preservation due to a raised pH level. This elevated pH results in a hazy appearance. However, by lowering the pH value-for instance, with citric acid to below 8.5-the product's inherent cloudiness dissipates, thereby facilitating the creation of clear formulations.
At a pH below 11.5, APG 0810H60 no longer possesses adequate protection against microbial contamination. Therefore, it becomes necessary to preserve the final formulation appropriately.
Storage and transportation
APG 0810H60 should be stored in their original, sealed containers, protected from frost, and maintained at temperatures below 43°C for a minimum of one year. For bulk storage, an Intermediate Bulk Container (IBC) or a standard 200-liter drum is recommended.
Should you require APG 0810H60, also known as Decyl Glucoside (CAS Number: 68515-73-1), we welcome you to purchase these high-quality products through our professional manufacturers and suppliers based in China.
Hot Tags: apg 0810h60/220/decyl glucoside/cas:68515-73-1, China apg 0810h60/220/decyl glucoside/cas:68515-73-1 manufacturers, suppliers, factory, APG 0810, 68515 73 1, alkyl polyglycosides, APG220, 68515-73-1, APG0810
